Stock Rom for Samsung Galaxy On5/On5 Pro(SM-G550FY), OFFICIAL Android 5.1.1 and 6.0.1

Before flash the Firmware zip, things to do:-
1. Charge your battery up to 40%.
2. Must enable the Developer mode( to enable developer mode go to setting->about device->software info-> now click the "Build number" 10 times. Then you get a flash message "Developer mode enable".
3. Now you see a "Developer options" in Setting. Do this
(a) Go to Developer options, "ON" the developer mode if not "ON"(show in the top of the Developer option).
(b) ON the option "OEM unlock"
(c) ON the option "USB debugging"

Now install the Samsung USB device driver in your PC and restart the PC.
Download USB Driver

Instructions

Step 1. Extract (unzip) the firmware file
Step 2. Download Odin v3.11.1 (file given below)
Step 3. Extract Odin ZIP file and install it in PC
Step 4. Open Odin v3.11.1
Step 5. Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Step 6. Connect phone and wait until you get a blue sign in Odin
Step 7. Add the firmware file to AP / PDA
Step 8. Make sure re-partition is NOT ticked
Step 9. Click the start button, sit back and wait few minutes

Rom Link

Download Firmware for Android 5.1.1

Download Firmware for Android 6.0.1

Note:- Android 6.0.1 is the official release of Galaxy On5 Pro(which is upgrade version of On5) not official release of Galaxy On5 but you can flash the firmware in Galaxy On5 also and It will run without any trouble or bugs. I'm running it without any problems or bugs on Galaxy On5.



For Rooting and TWRP for your Galaxy On5 and Galaxy On5 pro , you can go through these threads :-

For Android 5.1.1 (only for Galaxy On5)
http://ift.tt/2bVadvu

For Android 6.0.1 ( for both Galaxy On5 Pro and On5)
Note:- If you are upgrade Galaxy On5 to Android 6.0.1
http://ift.tt/2bV972S

Thanks to @vaibhavpandeyvpz @sandix for TWRP and Root

Attached Files

Odin3-v3.11.1.zip - [Click for QR Code] (974.6 KB)

from xda-developers http://ift.tt/2bV7T7W
via IFTTT